The four foot light touch switch, as the name suggests, is a four foot light touch switch. There are also various classifications of light touch switches, such as three foot light touch switches and two foot light touch switches. Regarding the performance and use of four foot light touch switches, as well as the common problems encountered by light touch switches, today we will mainly explain the storage methods and precautions of four foot light touch switches.

Storage method for four foot light touch switch

Method 1: Do not save when fully pressing the four foot light touch switch.

Method 2: When delivering the four foot light touch switch, it should be stored in a place that is normally damp, at room temperature, not exposed to direct sunlight, and free of corrosive gases. Please use it quickly within six months from delivery.

Method 3: Lightly touch the switch with four feet to avoid stacking too much.

Method 4: After opening the package, store it in the same environment as the previous three points, and then use it quickly.

Precautions for four foot light touch switch

Note 1: The four foot light touch switch is designed and manufactured under the condition of a DC resistive load. When using other loads, it should be acknowledged separately.

Note 2: When operating a four foot light touch switch, applying a specified load or above may damage the switch. Be careful not to apply the specified force on the switch.

Note 3: When welding the four foot touch switch terminals, assuming a load is applied to the terminals, there will generally be loosening, deformation, and deterioration of electrical characteristics due to different conditions.

Note 4: If corrosive gases are emitted from the materials around the switch by lightly touching it with all four feet, it may cause poor contact and other phenomena. Therefore, it is necessary to make a confession beforehand.

Note 5: When printing circuit boards and recommending circuit boards by lightly touching the switch through holes with four feet, the influence of thermal stress may change. Therefore, please acknowledge the welding conditions in advance.

Note 6: For flat shaft rod types, try to press the center of the switch as much as possible. For the hinge structure, when pressed, the axis rod will move in the direction of movement. Please pay special attention.

Note 7: When lightly touching the switch with four legs for two welding operations, it should wait until the first welding returns to room temperature before proceeding. Continuing heating will cause peripheral deformation, loose terminals, falling, and a decrease in electrical characteristics.

Note 8: For the setting of welding conditions for four foot touch switches, internship batch production conditions should be provided.

Note 9: When printing the holes and methods of the four foot touch switch circuit board equipment, please refer to the recommended standards recorded in the product diagram.

Note 10: Do not use it for mechanical inspection purposes. Use our company's perception switch for inspection purposes.

Note 11: Pay attention to the intrusion of foreign objects outside of enclosed areas.

Note 12: Avoid using the four foot light touch switch to operate from the side.

We have explained the precautions for four foot touch switches very clearly. When you have achieved all of these, you can test the lifespan of the touch switch and find that its lifespan will be extended.